Pumps/Inflation

Easily convert your Presta valve into a Schrader valve with Genuine Innovations' lightweight, all-aluminum Presta Valve Adaptors. - Card of 12 - Construction: aluminum - Airtight O-Ring Seal/Screw On

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

Compatible with Planet Bike ALX, AL, STX, ST, and COMP floor pumps - Dual head with hose - Will work with any floor pump Planet Bike has made except for Air Supreme

Angled Presta valve adapter - Designed for disc wheel use

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves. - Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation. - Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike. - Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple. - 45 grams - Lifetime warranty

Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.

Upgrade or replace your hose! Prestacycle's red hose is made in USA from reinforced polyurethane and is 3X more flexible than their previous black hose. New Quick-Click2 + Spin-on head. 300 psi working pressure, 13 inches length. Uses standard 1/4" threads. Smooth alloy clamps for comfortable use of the spinner head and corrosion resistance. Non-marring and resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -90° to +175°F. Fits all previous Prestaflator tools, o-ring included.

Anyvalve Air Bleed Pump Head spare part.

Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge

The Boundary CO2 offers a fast and efficient method to reinflate your tire in an emergency. The valve is protected to avoid accidental engagement and our design allows you to easily control the rate and flow of CO2. The pack contains a 16g cartridge.

This rugged floor pump, made with a steel barrel, works on any type of valve so you never have to worry about compatibility. Details: - Sports needles included - Convenient integrated hose keeper on handle - Reinforced plastic base, with molded 'topo map' pattern - 37-inch hose to reach valves in stands or car racks - PSI and Bar increments on gauge, with vibrant color-matched background - 140 PSI, 9.7 Bar maximum

The Muc-Off Inflator kits help riders quickly inflate their tires and quickly get back to riding in no time. Each kit contains 2x cartridges, 1x compact and durable CNC-machined inflator head with soft-touch press down button which easily controls CO2 release. Dual head nozzle compatible with Presta and Schrader valves and 1x neoprene sleeve to help avoid freeze burn. - Push design to easily control CO2 release - Stainless steel internal pin - Dual head nozzle, compatible with both Presta & Schrader valves - Compatible with most threaded 16g & 25g CO2 Cartridges - Two cartridges included

Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction  - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty

High Pressure Shock Pumps to maintain your shock and seat post air pressure. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder - Foldable hose

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

Crank Brothers' Sterling S Pump features a tough aluminum barrel a little shy of 8 inches long for maximum pumping power and a switch to select between high-volume for off-road tires or high-pressure for road tires. The universal head gets up to 100psi on either Schrader or Presta valves without having to switch the head.

Blackburn's Mammoth Flex Mini-Pump is a compact, mountain bike specific pump that has a flexible hose attachment. A built in PSI gauge lets you dial in precise tire pressure on the trailside. - Mini pump designed specifically for mountain bikes with 50 psi maximum - Pump head locks in place with a simple twist - Inline 50 PSI gauge - High-volume MTB design - 222g / 0.49lbs

Sturdy Steel Barrel, Large Gauge Built To Last Made with a bombproof steel barrel and base, the Piston 2 is built to last. Which is good, because with its extra large 3” gauge and versatile Anyvalve pump head, this is a pump you'll never get tired of using. - Extra Long 38" Hose To Reach Valves In Stands Or Car Racks. - Convenient Integrated Hose Keeper On Handle. - Psi And Bar Increments On Gauge, With Vibrant Color Matched Background. - 160 Psi, 11.0 Bar Maximum

Stay pumped. An incredibly easy-to-use gauge is paired with a stable base and durable body for an ideal go-to pump for inflating any bicycle tire. Where it thrives: In the garage What it's built for: Efficiency, Stability Highlights: - Tough steel base, durable barrel / extra-large 5" (130mm) gauge offers increased readability - Recommended pressure ranges help select suitable tire pressure - AutoSelect head adjusts to Schrader and Presta valves

The Muc-Off Inflator kits help riders quickly inflate their tires and quickly get back to riding in no time. Each kit contains 2x cartridges, 1x compact and durable CNC-machined inflator head with soft-touch press down button which easily controls CO2 release. Dual head nozzle compatible with Presta and Schrader valves and 1x neoprene sleeve to help avoid freeze burn. - Push design to easily control CO2 release - Stainless steel internal pin - Dual head nozzle, compatible with both Presta & Schrader valves - Compatible with most threaded 16g & 25g CO2 Cartridges - Two cartridges included

Serfas' FP-200 Floor Pump lets you fill your tires in no time. It has a grippy, sturdy base and a metal barrel for maximum inflation power. Its ergonomic handle and top-mounted gauge make pumping super easy. Plus, Serfas' easy-to-use Simple Valve head accepts all valve types and includes additional attachments to inflate balls.

Crank Brothers' Sterling SG Pump features a tough aluminum barrel a little shy of 8 inches long for maximum pumping power; a switch to select high-volume (off-road tires) or high-pressure (road tires) inflation, and a handy built-in gauge. The universal head gets up to 100psi on either Schrader or Presta valves without having to switch the head.

Massive Gauge, Bombproof Barrel Smart, Simple, Built To Last No more squinting or bending down low to see your tire pressure. The piston 3, with its massive 4" gauge, lets you dial in the precise pressure. And a tough steel barrel and base means you'll have this pump for years to come. - Pump head features rugged alloy cap. - Extra-long 37" hose to reach valves in stands or car racks. - Convenient integrated hose keeper on handle. - Psi And bar increments on gauge, with vibrant color matched background. - 160 psi, 11.0 bar maximum

Crank Brothers' Gem Floor Pump overs versatility and simplicity in an easy-to-use floor pump. What else do you need? - Foot activated high pressure / high volume switch - Wide stamped steel base for easy pumping - Corrosion resistant aluminum body - Presta /Schrader convertible head - Hidden needle adapter & plastic valve adapter - 160 psi / 11 bar - Bar / psi analog gauge

Featuring a universal Presta/Schrader head and large analog gauge. Details - Large, stable steel base and tube - Universal Presta/Schrader head - Ergonomic handle with hidden needle & inflator - Large analog gauge in base - Extended hose length Specs - Pressure: 160 psi / 11 Bar - Warranty: 5 Years

Inexpensive Doesn't Mean Cheap. The Core 2 pump still shares all the techy bits of its big siblings but is built for folks operating on a smaller budget. The AirTap head will function with Schrader/Presta/Dunlop valves and has an integrated bleed valve for dialing in your pressure. Our aviation-style gauge is 2.5 inches wide, and easy to read. It's also built into the base to add to the stability of the Core 2 during use. Whether you are in the basement, the garage or at the trail head, the Core 2 has you covered. - Dimensions: 4.25 x 9 x 24 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Air Bleed - Button on the pump head to micro-adjust pressure.