Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Bottom Brackets

$115.99 - $125.00
The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups
$359.00 - $459.00
The CeramicSpeed BB86 SRAM GXP Road Bottom Brackets are compatible with press-fit specific bike frames only. The shell diameter is 41mm ID, and when the bearings and cups are pressed in, they fit the 24/22mm SRAM and Quarq spindle. There are two versions of the CeramicSpeed Bearings that come installed in the cups. The first choice is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. - This BB86 bottom bracket works with cranks that have 24/22mms, including Quarq and SRAM. - Frictional drag of CeramicSpeed Standard Bearings is typically 0.3-0.4 watts per set. That represents an average 75% drag drop versus standard bottom brackets. The hardened-steel races feature ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings. - Coated Bearings reduce drag further and increase service life. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. In The Box: - 2 cups with bearings installed - 2 dust covers - 1mm spacer - 0.5mm spacer - GXP wave washer - Plastic cable protector - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet
$10.00
Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi
$54.99 - $58.00
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)
$55.00
This FSA Bottom Bracket allows you to run MegaExo and other 24mm spindle cranksets with a BB86/BB89.5/BB92 frame. - Intended for road use - Steel bearings
$61.00
Run your 386EVO crank with your frame that is designed for BB86 Shimano Pressfit bottom brackets with this FSA bottom bracket. - 2 lines of bearings on each side
$45.39 - $53.39
Pedal smoothly and steadily with Origin-8's Torqlite Square-Taper Bottom Bracket. The forged aluminum body and cups are light and tough, the CNC'd hollow-chromoly spindle is stiff and shaves more grams, and the sealed bearings are super smooth and durable.
$45.89 - $54.49
Forged and CNC machined AL6061 cups - Double sealed replaceable bearings - Fits 68mm and 73mm shell widths - 1.37" x 24T English thread - Alloy spacers included for chainline adjustment - Anodized and laser etched finish
$50.99
Aluminum cups - Fits BB86 and BB92 - Includes shims for GXP - SHIMANO Equivalent SMBB-72-41B / SMBB-71-41A - Shell: 86mm - Spindle Type: HT2/GXP - Weight: 103g
$73.00
- Precision machined AL6061 cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed dual-row premium flanged bearings - Designed for installing SRAM DUB 28.99mm spindle cranks into BB86/92 frames - Shell: 86-92mm x 41mm - Interface: BB86/BB92 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061 - Weight: 90g
$77.00
- Thread-together bottom brackets provide a secure and stable shell interface for smoother operation and extended bearing life - Hybrid AL6061/Nylon fiber cups for a superior fit and noise-free operation - Low-friction dual seals protect the bearings from harmful contaminants - Sealed premium bearings are both serviceable and replaceable - Designed for installing Shimano HTII 24mm, SRAM GXP 22/24mm, or DUB spindle cranks into BB386 frames without the need for adapters - Origin8 Nylon composite BB tools are recommended to avoid the possibility of damaging the cups - Shell: 86.5/92mm x 46mm - Interface: BB386/BB392 - Spindle Type: SRAM DUB 28.99mm - Cup Material: AL6061/Nylon Fiber - Weight: 135g
$59.99
• Custom 6805, 16 ball retainer bearings with titanium coated races for outstanding corrosion resistance • Bearings feature Race Face's custom triple wiper seal to better retain grease and keep contaminants out • Designed to be used with cranksets that have either X-Type or EXI spindles
$38.00
Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket lets your SRAM GXP crankset (sold separately) spin effortlessly without weighing you down.
$41.00 - $54.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$41.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system
$43.00
SRAM's GXP PressFit Road Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.
$43.00 - $50.00
SRAM's GXP Team PressFit MTB Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.
$46.00
The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Easy installation - Two fully sealed cartridge bearings - ISO 4210 compliant. See Declaration of Conformity for details. - BB-frame interface PressFit (Road: 86.5mm) - Crank-BB interface DUB - Bearing type Standard - Spindle diameter DUB - Cup material Steel
$49.00
Get more distance out of every pedal stroke with SRAM's phenomenal BB30 PressFit Bottom Bracket Assembly. It features Gutter Seal technology to keep dirt out and everything spinning smoothly. Plus, it presses directly into your frame's 46mm-wide BB30 bottom bracket shell for reduced weight and increased longevity.
$50.00
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30 for road will require a 68mm wide shell while Pressfit 30 for MTB will require a 73mm wide shell. - Easy installation - PressFit cups for lighter weight - Narrow Q-factor and more ankle clearance - Integrated gutter seal to prolong life - Integrated adjuster - 30mm spindle diameter
$227.00 - $260.00
SRAM's Red GXP BlackBox Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature ceramic bearings that drastically reduce drag on the crankset, meaning more of your power goes directly to the road. Plus, the ceramic bearings and stainless-steel races mean these cups are incredibly light and durable, too!
$300.00
SRAM's GXP BlackBox PressFit Road Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature ceramic bearings that drastically reduce drag on the crankset, meaning more of your power goes directly to the road. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.
$17.00
BB-UN26 cartridge bottom bracket. - Smooth rotation - Square taper spindle - Sealed cartridge bearing assembly
$20.00
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$20.00
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$20.00
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
$20.99 - $26.00
Shimano BB-ES300 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included
$25.00
Shimano's BB-UN55 Square Spindle Bottom Brackets are the unofficial standard for English-threaded cartridge bottom brackets. Quality, value, and durability come together to keep you cranking for many, many miles. - Fits JIS Square-Taper Cranksets - Hollow spindle - Crankarm fixing bolts not included
$31.99 - $36.00
Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.
$40.00
Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets
Page 1 of 2 Next page