Parts

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- Aheadset preload adjusting bolt

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.

- 2Mm thick stainless steel with standard 6-Bolt/44Bcd bolt pattern - Compatible with most disc brake systems - Includes (6) Torx bolts, (1) Torx wrench

Box Two™ Integrated headsets feature an aluminum top cap, CNC-machined bearing cover, and solid crown race with super-smooth rolling, angular contact bearings. FEATURES - Precision Sealed Bearings COMPATIBILITY - Box One XS Fork - Box One XE Fork - Box One Stem Lock - Frames with a 1" Integrated NON-Tapered Head-Tube

Our Box Four tier is for those people who just want less fuss! You're fond of Prime 9, but know 8 is enough, and surely 11-42T is plenty of range for an 8-speed cassette. Our derailleur still has the Limited Slip clutch but now arrives with a more compact cage. The custom 8-speed chain is built for abuse, although it's sophisticated enough to have its own Wide/narrow chainring. Push through fewer gears with a no-nonsense shifter. This combo will transport you to 1 by territory for less than $200.

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 7.5 – 9.5-inch - Diameter: 1.5mm

- Chromoly construction - Classic BMX design - Material: Cro-Mo - Setback: 0mm

- CNC machined 6061-T6 alloy - Fits 1-piece and 3-piece BMX cranks - 23.8mm hole for 1-piece cranks with shims for 19/22mm 3-piece cranks included - Hard anodized coating - Unique, 1/8" quiet drive technology - Mount Compatibility: 1-piece/3-piece - Chain Compatibility: 1/2" x 1/8"

- Forged alloy construction - Double bolt centering design - Oversize 6mm hex bolts

Brooks Microfiber Bar Tape is manufactured from a synthetic textile which has been treated with a polyurethane coating for maximum resistance against abrasion and moisture, providing excellent durability. Included are a pair of Brooks Rubber Bar End Plugs.

In the Brooks tradition, this bar tape is made of natural leather to make it the perfect complement to your Brooks saddle. The bar tape comes in a kit including: - 2 strips of light, perforated leather bar tape - 2 rubber bar end plugs - 2 adhesive cloth strips

In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Inner Diameter: 22.2 mm - Weight: 290g per Pair

Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles and natural cork. Made in Italy.

The Cambium C17 All Weather is made for years of hard riding in an angled riding position, for commuting in the city or travelling the globe. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.

Brooks' flagship model, the B17 Special has offered sublime support and unrivaled comfort for more than a century. A favorite of casual and high-mileage cyclists alike, each saddle shapes itself to its rider, leading to a customized ride that fits like no other. The B17 Special's top features high-grade leather secured by Brooks' trademark, hand-hammered copper rivets.

Campagnolo small parts for bottom brackets.

Alloy braze-on adaptor clamps are designed to work with all Campagnolo braze-on front derailleurs

Alloy braze-on adaptor clamps are designed to work with all Campagnolo braze-on front derailleurs

Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions. - Hollow pins for reduced weight - NI-PTFE antifriction treatment reduces friction for smooth pedaling, reduced noise, greater efficiency and longer chain life - Links (links): 114 - Width: 5.9 mm - Drivetrain Speeds: 10 - Chain Connection Type: Pressed Pin - Half Link Chain: No - Weight: 255 grams

Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 26 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4 • Upper Stack Height: 18 mm • Weight: 163 g

Cane Creek's 200TT Brake Levers are perfect for bullhorn-style bars and other TT base bars. Aluminum levers and aluminum mounting brackets mean low weight and excellent longevity. There's even a rubber end plug that perfectly sized for your thumb!

This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

Hellbender 70 Slam Top Assembly headset.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 109g

The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

The CeramicSpeed BB86 SRAM GXP Road Bottom Brackets are compatible with press-fit specific bike frames only. The shell diameter is 41mm ID, and when the bearings and cups are pressed in, they fit the 24/22mm SRAM and Quarq spindle. There are two versions of the CeramicSpeed Bearings that come installed in the cups. The first choice is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. - This BB86 bottom bracket works with cranks that have 24/22mms, including Quarq and SRAM. - Frictional drag of CeramicSpeed Standard Bearings is typically 0.3-0.4 watts per set. That represents an average 75% drag drop versus standard bottom brackets. The hardened-steel races feature ceramic balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings. - Coated Bearings reduce drag further and increase service life. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. In The Box: - 2 cups with bearings installed - 2 dust covers - 1mm spacer - 0.5mm spacer - GXP wave washer - Plastic cable protector - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

- Hydrophobic construction - Cooling air channels - Non-slip bottom - Quick draw closure system Dimensions - Road: 11 x 6.75-inch - Cruiser: 10.25 x 9.75-inch - ATB: 11.5 x 8.25-inch

Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs

Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.

A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees

Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees

Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s

A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool

Crank Brothers' Quattro 3-hole cleats let you use Crank Bros. pedals with your road shoes. The cleat and walking plate mount directly to shoes that use a traditional 3-hole mounting setup. - Weight (pair): 86 grams - Shoe compatibility: LOOK/SPD-SL - Release angle: 15 or 20 degrees

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years

Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

The all new Crank Brothers Highline remote kit. - Universal mounting system: top/bottom & left/right - Single bolt hinge locking system - Infinite spherical adjustment - Compatible with: Highline and other cable-actuated dropper seatposts

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.

Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)

Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.

Dimension Seatpost Binder Bolts - 16g